LS1 Rear Brakes with backing plates - SOLD

[CapSS92]

LS1 Rear Brakes with backing plates

I have for sale two sets of rear brakes from an LS1. These are good for upgrading your rear end to disc brakes. They come with the calipers, caliper brackets, backing plates, and all the misc hardware that comes with it. I am having them cleaned and will post a pic as soon as I get them back from the shop. I am asking $160 each set plus whatever freight comes out from El Paso, TX. Thanks and feel free to email me with any questions you may have.

List Date: 1/30/2013

For more info, click here to view the original listing: LS1 Rear Brakes with backing plates
--------------------------------------
Item Has Been Sold.


--------------------------------------

[erikgto]

Hi there,

Are these ready to got, or do the calipers need rebuild? Rotor thickness good?
Just a stupid question, but is this all I need for a rear disc conversion on a '70 GTO 10 bolt besides the e-brake cable?
If so, please get me a shipping quote for one set to 07036 Linden NJ

[geberhard]

any interest in selling just the backing plates? Thanks!

[analyte]

I have the same question as Eric above. What's included and what's missing to install?

Interested in a set myself.

Thanks,
Kerry

[CapSS92]

Hi, the calipers are in good shape with no tears in the seals. The pistons move freely with no binding at all. It also comes with the backing plates that have the parking brake built in and the mounting bracket (abutment) for the caliper to attach to the backing plate. What you do need is the rubber boot for the parking brake lever. They are available from RMS Auto. http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot If you aren't using the parking brake then you could probably get away without it. You will need the rotors but it's usually cheaper and better to source a set locally or on Ebay. All you need is new hoses, rotors, and pads to get them installed. I had to shim the backing plate with some washers to make it center on the rotor on my Chevelle but I think there is someone selling a plate already cut out to use as a shim. I saw an ad on here for them. I am getting them cleaned as I hate to sell anything dirty and grimy. As soon as I get them I will take pics to post.
As for breaking them up I would prefer to sell them together otherwise I'd wind up with a lot of calipers.

They are heavy, about 30lbs. UPS shows shipping with insurance to NJ right at $54 but we can do $45 and I'll cover the rest. Thank you all.

Alex

[chuckd71]

I was looking for some of those rubber boots, hard to find. I've already done this swap but free bump and thanks for the link.

[CapSS92]

Thanks. I got that link from someone on here way back. I am attaching a pic of the brakes. I just got them back all cleaned and just need to grease them up and put them all back together. Thanks to all who have replied.

[CapSS92]

Hmmm looks like I have to get used to this new selling system. Thanks for the payment. I still have the other identical set available. I may have to repost it but I am posting this in case anyone was interested in the second set. Henry I will send you a tracking number thru the UPS system when I send it out on Monday. Thanks.

Alex

[LT1Nova]

I'm very interested, PM sent.

[CapSS92]

Reply sent. Thanks.

Alex

[CapSS92]

Both sets have been sold. Thank you to everyone for your replies.

Alex

[Probird]

Alex,

Thanks again, everything arrived save and sound. Look forward to the install and hope everything goes smoothly.

Henry

[CapSS92]

Glad to hear it Henry. Thank you.

Alex

[LT1Nova]

I got my buddy's brakes yesterday, everything looked great Alex. Thanks a bunch.

[CapSS92]

No problem. As always glad to hear everything arrived ok.

Alex