Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Thread: Wheel stud size

    1. #1
      Join Date
      Mar 2007
      Location
      Cincinnati, OH
      Posts
      331
      Country Flag: United States

      Wheel stud size

      In my latest upgrade I am looking at going with bigger brakes and wheels. So should I expend the extra effort upgrading to 1/2inch studs over the stock 7/16inchers( either drilling old axles and front hubs or possibly upgrading to a new differential anyway? Will the new wheels come with holes big enough? Looking at forged wheels...

      Jim S.
      67 RS
      "driver "


    2. #2
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      I upgraded to 1/2" studs on all four corners of the van build. No issues with wheel fitment. As long as the rims are lug centric (most of them are) you won't have any issues with wheels but you will probably have to run a .53 dia drill through the rotors if they are seperate from the hubs. If you do some digging on lug specs you can probably find 1/2" lugs that will use the same knurl size as your 7/16ths. I ended up using a Ford lug in my home made hubs up front and ordered 1/2" studs in the Moser axles for the rear.
      Mark
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/

    3. #3
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Yes, the effort required to upgrade to larger wheel studs is worth it IMHO. Call it cheap insurance, call it what you will. You can't buy anything nowadays with similar weight, HP, traction, handling as most pro-touring builds that doesn't have at least M12x1.5 studs or larger which is mostly an indication of advances in tire technologies.

      Most aftermarket wheels designed for 60 degree conical seat lugnuts will have large enough holes to clear up to M14 or 9/16" wheel studs, so unless you're running 5/8" studs, you should be okay.

      Tobin
      KORe3
      It's what I does.


    Advertise on Pro-Touring.com