Male bulkhead connection P/N

[77tony]

Looking for a P/N or source for the male end that plugs into the bulkhead connector attached. Plan is to tie in the female GM connector through a male end and into the existing 14 pin connector on a 1980 Porsche 928 (Just Peachy) TIA. 77tony

[esenior]

Try searching through the Mouser online catalog and enter in the specifics of the connector. I did some quick poking around and found what looks like a match (but I don't know the specifics on your connector).

http://www.mouser.com/Search/Refine....yword=15326854

http://www.mouser.com/ds/2/105/15326....tif-13732.pdf

http://delphi.com/connectors/feature...earch=15326854

[77tony]

Thanks, That's what I am looking for but maybe need to source at the junkyards for the male connector & approx 2' of wiring hanging out to tie in to existing system (Porsche) wiring. T

[esenior]

If you search the Delphi web site for the connector, you can click on the tab for related products in order to get the part numbers for the insulators and pins. This still requires that you crimp/solder up your own harness though. I've also bought a few harnesses from the junk yard (for my Le Sabre mirrors), always a good time poking seeing what you can find!