Results 1 to 20 of 37
Thread: pmw fan controllers
Hybrid View
-
12-13-2012 #1
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,838
It's a small thermistor that is placed into the radiator fins next to the radiator outlet. Basically, just shove it in between the fins. It's attached to a small wire that routes to the controller.
The current generation of DCC pwm fan controllers does not need an on/off feed wire. Instead, once the radiator has cooled via the fan to the minimum set point, the fan goes off. Hence, the fan may run for a short time after key-off to rid the radiator of heat. There is a method to use a key on/off as well.
The DCC parts are brutes. The standard part has a 55A continuous capacity. That's what's going in mine to run the Mark VIII fan.VaporWorx. We Give You Gas http://www.vaporworx.com
-
Reply With Quote
