Results 1 to 13 of 13
Thread: Sailpanel install question?
Hybrid View
-
08-08-2005 #1
New to Pro-Touring
- Join Date
- Apr 2005
- Posts
- 2
The ones that I got from Rick's had a small square extra piece of cardboard glued to the back in the locations of the holes in the car. There was a small slot that the clip fit into. If yours do not have this extra piece of cardboard then I would give Rick's a call about it. Attached is a bad drawing but maybe you get the idea
-
08-13-2005 #2
Registered User
- Join Date
- Apr 2001
- Location
- Rockford Illinois
- Posts
- 3,949
Deluxe interior lights....
While working out the headliner in my car I had the thought more than once to install the deluxe interior lights that have a mounting place right in the center of the damn things. It seems like the best way to make sure they stay put.
I was also considering putting a small speaker there also since not too many people will ever sit right next to it anyway.
I like the extra piece of cardboard idea to hold the clip. I think the right adhesive would also hold a piece of aluminum to it also.
If you are covering the panels and have the cardboard free of doing damage to the material you could staple the clip on and hammer it flat before you cover it up. This would be a lot like the puncture tangs that held on the originals.
Jim Nilsen
Reply With Quote
