Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 17 of 17

    Hybrid View

    1. #1
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States
      OK first of all, why in he_l would anyone use a worthless no control wire alternator. If your only wanting a battery charge wire then buy a couple of resistors and some wire, tear down a stock GM alternator and do the shunts inside.
      Te ones that snap on the terminals depend on an internal regulator with diode issues (inside regulator there is supposed to be a diode to help keep regulator turned off with key off, some Chinese regs delete this and it causes mysterious drains).
      If your talking a GM SI series alternator, a single 12v key on wire, possibly with a large diode generally works fine, then your charge wire.
      Yeah Ill get bashed on no control wire alternators work fine, never had issue, etc. BUT as a professional tech I can tell you I have swapped good stock parts in, properly wired them and customers always had much better luck with charging system and still had polished/chrome alternator too. One tiny 18ga wire too much for your compartment, come on. hard to run. Please.
      As for Duralast water pumps, Uhm DID IT SPECIFICALLY state an aluminum Edelbrock pump? did it Specify anodized, or powdercoated or what for other parts?
      Chips on specific parts, ok so you might be POed little,,but will anyone see then or was whole chunks missing.
      Also was kit drastically less than other systems?
      If its listed as painted or powdercoated, it might flake off or ship slightly where fasteners are tightened, especially without flat washers or washer headed bolts.
      My question is did it fit? Would it do the job? Was it much cheaper than other systems?
      Anodized aluminum pulleys are not my bag, but I may have to order some on my Monza. Clear coatings do get some abuse tightening.
      BUT as some say, return it and go elsewhere,,,if price is same cool if not, fork over MORE.
      As for duralast waterpump, who cares its NEW casting and many are assembled here in US with US parts. Some are not. We use a lot of them when the others brands are much more expensive.
      Oh and just cause it SAYS they use Edelbrock or Sanden in kits doesnt mean YOU are getting that in YOUR kit.
      I bought an oil pan kit from a vendor, said it came with pick up, showed hand built unit. They sent a kit with A on end of number, it cam with modified stocker. Had to send me other one as someone pulled the economy kit. Pickup cost nearly as much as pan did. modded other pickup I sent it back as a courtesy as they DID sent other pick up and give me some credit for delay and paid over night shipping.
      Also many companies have gotten so many POed people shouting ,screaming and frothing at mouth they tend to get lackadaisical in service, ask for a superior if they do that. If not satisfied then. Move on.
      Also understand much of Summit gets cheaper deals and cheaper packages. Close observation of adds and asking questions tend to bear this out.
      Their Fast Five wheels, are cheap, and do come with scuffs and scratches towards end of production. Buddy bough 8 when first came out, perfect, now he picks up 4 more discontinued, gets scuffed ones,,,wonder why.
      Good Luck
      Lee

      Lee Abel
      AFTERMARKET PERFORMANCE

      1977 Chevy Monza 2+2:Project "Cheap Trick"
      1978 C10 Long bed , On air and trailer puller
      2006 Buell Blast ,Just a bike to ride and for mileage
      1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"





    Advertise on Pro-Touring.com