WildBlue goes RideTech

[GeoffP]

I just checked to see if there were any pictures of the 48 Hour Camaro's suspension that shows the bump stop. The only thing I noticed in their pics is that they didn't use the threaded hole for the bump stop on their arms. I suspect their 18x10 wheels are nearly the exact same offset as my 18x9.5's and the difference is in the hub/rotor combination. My brake setup uses a rotor that bolts to the back side of the hub (Wilwood 12.19) vs. Baer's hat over hub design. The hat over hub adds anywhere from about a 1/4" to 3/8" if I remember correctly. This difference is probably why they did not have to use anything to limit steering travel more than the TruTurn already does with the built in limits. I'll try to get some pictures in a few minutes - definitely not working sick with it so cool and wet outside!