Custom LS2 Cold Air Intake

[oldguy]

As part of the project with the LS2 transplant we had to fabricate from scratch a cold air intake. Here's what we did

We bought some .50 wall 4" DOM Aluminum tubing.



Thats a BIG tube



We welded in the LS7 slot type port for the MAF






Put a mounting tab on the end close to the filter





This port is for the crankcase vent intake.



Mocked up on the car







All welded, ground, sand and test fitted.



We painted the cold air intake with bedliner to give it a rougher finish, just didn't want it smooth.











Spectre 8" double cone filter. we did remove ALL the branding on it as well.



We think the results speak for themselves.







Follow our build thread.

https://www.pro-touring.com/showthre...-Gen-LS2-6-spd