Project no-time

[craigs73]

gonna bring the thread back from the dead with a question.......i have the g-bar setup for rear suspension.....as of right now im planning on just bolting the lower two bars to the stock spring perch pads on the axles...but the problem is i had a brain fart early in this build when i bought the wheels before i measured (remember first project)and im thinking im not going to be able to shorten the axles between the end flange on the axle and the stock mounting pad for the leafs... its looking like im going to need to shorten the axles 2" per side..so i guess my question(s) is will there be enough room between end of axle and the leaf pad to cut out 2" if not then how will i need to shorten the rear and still use the g-bar?

oh and theres been no progress on the car this winter since i have no heat in garage lol...so dont ask just kidding....this summer im sure will be another slow progress filled summer since i will be working lots of 7 day weeks..