Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 84

    Hybrid View

    1. #1
      Join Date
      Jan 2006
      Location
      Melbourne, Fla
      Posts
      216
      Country Flag: United States
      Quote Originally Posted by Todd in Vancouver View Post
      The firewall is ready to be installed and it's time to start welding it in. As I haven't done any welding in a long time I thought it best to take some of the sheet metal cut offs and do some practice welds before I start on the car.



      Name:  IMG01515-20121010-1719.jpg
Views: 7950
Size:  107.8 KB

      Once I was warmed up I started small stitch welds around the new firewall;

      Name:  IMG01516-20121010-1821.jpg
Views: 8034
Size:  68.0 KBName:  IMG01517-20121010-1822.jpg
Views: 7744
Size:  69.9 KBName:  IMG01518-20121010-1822.jpg
Views: 7727
Size:  67.5 KB



      I am looking at purchasing a used Vintage Air set up from another member here on Pro-Touring. What I am not sure of is how it connects into the factory heater controls and how other builds have managed to hide the underhood connections while having a flattened firewall in the engine compartment? Anyone have pictures on how they did this or a link to some websites showing this? Thanks in advance

      Todd,

      You can use the VintageAir reroute kit. It brings all four outlets thru the firewall, then turns them 90degrees so you can route the lines under the fender....






    Advertise on Pro-Touring.com