Results 1 to 6 of 6
Thread: Test fit Engine
-
07-30-2005 #1
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- outside of Atlantic City
- Posts
- 20
Test fit Engine
OK here is a pic of my engine being test fitted into my Pantera. Pat (nitrovette) and I work on it today. I still need to install the trans and with the 180 headers the engine might have to come out. If we get lucky maybe we can just tilt the engine some and install the trans.
-
07-30-2005 #2
Registered User
- Join Date
- Mar 2005
- Location
- Jackson Ms
- Posts
- 1,220
i have always wanted to put a fuel injected 418w stroker in one of those cars. they just look bad ass. i used to have a sunbeam tiger that i put a 347 stroker in but its not the same :(
Chris V
SOLD
07-30-2005 #3
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- outside of Atlantic City
- Posts
- 20
I only went with a 392W but the 418W would do the job too LOL
07-30-2005 #4
Registered User
- Join Date
- Mar 2005
- Location
- Jackson Ms
- Posts
- 1,220
LOL. i have a 418w in my mustang in the sig. it runs 10.30's on pump gas and is in street trim. the nitrous and rase gas is deep in the 9's. now if i could just make it turn????
Chris V
SOLD
07-30-2005 #5
Registered User
- Join Date
- Aug 2004
- Location
- absecon, new jersey
- Posts
- 405
now we just need to get that flywheel here and we can get the tranny in and get this thing done and fired up.
73 corvette chop top silver LS6 motor ,LS6 intake,700r4,2400 pro torque convertor ,3.70 gears,modified hooker sidepipes to fit LS1,17 x9.5 boyd starburst,nitto 275/50/17-255/50/17 tires,vb&p suspension,nitrous,L-88 headlights,autometer guages.L88 hood,flares,spreader bar,vb&p sway bars
08-02-2005 #6
Registered User
- Join Date
- Jan 2005
- Posts
- 183
Ooooooooooo, 180 degree headers...
Sweet sounds. Post a sound clip when she runs!
2008 MazdaSpeed 3 GT daily driver
301 WHP, many mods
255/35/18 tires and 18x9 wheels to come
No PT project yet :-(
Reply With Quote
