Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Threaded View

    1. #1
      Join Date
      Jul 2012
      Posts
      24
      Country Flag: United States

      Borg Warner t5 Issue with BBC.

      Okay here goes.....



      I purchased a 69 Camaro that was nearly complete and got a good deal but the car was thrown together at the end and one of the issues is the fact the builder used a standard T5 Bellhousing (Hydraulic Clutch) and an F body Tranny. The Tail Housing is therefore sitting at a 17 degree angle to the crosmember and the shifter sits way off to the passengers side.

      The obvious solution is to Change bellhousings right?? Wrong. The Correct housing won't fit because the headers hit the clutch bracket. Even if I moved changed headers the correct housing won't fit over the flywheel on the bottom half.

      I thought that all things considered it might be easiest to use the existing bellhousing and just swap the tailhousing on the tranny with one that isn't canted. Is this even possible? Will a mustang t5 tailhousing fit my f-body t5? if so will the shifter be in the same spot? Will I have Speedometer issues? Is there another GM tailhousing that will fit?

      The only other option I can figure out is using a hydraulic throwout bearing and cut the bracket off a Lakewood bell.

      Ideas? Suggestions? Wisdom? Keep me sane?

      Thanks guys.





    Advertise on Pro-Touring.com