Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 3 1 2 3 LastLast
    Results 1 to 20 of 43

    Hybrid View

    1. #1
      Join Date
      Aug 2004
      Posts
      1,464
      Country Flag: United States

      How Low is TOO LOW??

      So I guess thats a weird question but I am running ridetech front and rear and I love the way the car sits currently but my headers and exhaust are very low to the ground.. How low? Well the frame of the car sits 5 inches from the ground and the lowest part of the exhaust and headers are sitting about 3 inches from the ground. So is this normal?

      Sorry but I've never built a car this low to the ground before and dont know what the norm out there is. What is the minimum amount of space I should have for clearance? (I know I cant go over speed bumps and have to be careful going over driveways too but just wondering if this is not doable...

      Thanks
      Mark
      TOOFUN



    2. #2
      Join Date
      Apr 2010
      Location
      Jersey Shore
      Posts
      695
      Country Flag: United States
      Ive found most speed bumps are about 4" tall... so that should be your absolute minimum. The lowest point on my car is 4.5" off the ground. When I go over speed bumps I just go real slow to make sure I dont let the suspension compress when the wheel comes off the bump. Otherwise I havent had any issues driving on these horrible NJ roads. You learn to look for obstacles like pot holes, dips, raised man-holes and debris when driving. Steep driveways are no issue either. Just have to learn how to navigate up them.
      -Chris
      '69 Corvette
      '55 Chevy Hardtop
      AutoWorks Middletown, NJ
      @autoworksnj for corvette and shop car pics
      https://www.pro-touring.com/showthre...e-Build-Thread

    3. #3
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      I have about 2.5" of clearance under my header flange. Clearly this is too low and I'm considering changing to a mid-length style header. Ideally I would like to find a side exit header so I could run side pipes. That said, I have a few scratches on the headers but for the most part I have had surprisingly few problems dragging. I do have to drive around parking lot speed bumps and I have to be very careful when I go in and out of unfamiliar drives but overall I have learned what I can and cannot drive over without dragging.

      Name:  Camaro 081.jpg
Views: 2141
Size:  349.6 KB
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    4. #4
      Join Date
      Jun 2007
      Location
      Tampa, FL
      Posts
      62
      what size wheels and tires are you running ? My 68 has DSE control arms with 2" drop springs and its still too high. I'm getting ready to purchase new wheels / tires and like your stance.

    5. #5
      Join Date
      Oct 2007
      Posts
      1,872
      Stance isnt too low but those headers sure are :-)
      From a place you will not see comes a sound you will not hear....

      67 Camaro In progress

      https://www.pro-touring.com/showthre...-Tap-67-camaro

    6. #6
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      Quote Originally Posted by XLexusTech View Post
      Stance isnt too low but those headers sure are :-)
      I agree!
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    7. #7
      Join Date
      May 2012
      Location
      Iowa
      Posts
      91
      Country Flag: United States
      My headers sit low also

    8. #8
      Join Date
      Jun 2006
      Location
      Katy,TX
      Posts
      1,678
      If I can't get a floor jack under the crossmember it's too low.
      1978 Black Trans Am 455 Edelbrock heads [email protected] through mufflers on pump gas
      1981 Trans Am 400 stock type motor
      79 Camaro getting a 500" 695 hp IA2 Pontiac motor
      1965 GTO project car
      470ci/Chevy dual quad 409 604 HP 64 Impala SS project
      2004 Pulse Red GTO

    9. #9
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      Quote Originally Posted by Skip Fix View Post
      If I can't get a floor jack under the crossmember it's too low.
      that's what short lengths of 2" thick planks are for.
      Tom Hensley
      69 ss/rs clone
      98 ta ragtop

      "attack life....it's going to kill you anyway."


    10. #10
      Join Date
      Jun 2006
      Location
      Katy,TX
      Posts
      1,678
      Quote Originally Posted by SR71 View Post
      that's what short lengths of 2" thick planks are for.
      I've gotten too old to have to do that! In fact my 79 Camaro the factory spoiler is low an dfar back to pull on the car trailer I had to stack 2x12s to make a mini ramp(put a handle on one end screwed them together) to put the trailer ramps on and not drag!
      1978 Black Trans Am 455 Edelbrock heads [email protected] through mufflers on pump gas
      1981 Trans Am 400 stock type motor
      79 Camaro getting a 500" 695 hp IA2 Pontiac motor
      1965 GTO project car
      470ci/Chevy dual quad 409 604 HP 64 Impala SS project
      2004 Pulse Red GTO

    11. #11
      Join Date
      Mar 2012
      Posts
      408
      Country Flag: United States
      Low headers suck

    12. #12
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      after the recent wheel/tire swap, my subframe is 3" off of the ground. with the old wheel/tire combo it was only 3.5" off of the ground....and I drove it that way for 2 yrs.

      switching to shorty headers and getting the exhaust tucked up into the sub was an absolute necessity. did I give up a few ponies?, most certainly. but the end result was well worth it.
      Tom Hensley
      69 ss/rs clone
      98 ta ragtop

      "attack life....it's going to kill you anyway."


    13. #13
      Join Date
      Mar 2005
      Location
      Texan Back in Texas!
      Posts
      675
      Country Flag: United States
      You will know that you have it too low when you teeder-todder on a speed bump. In all seriousness, it seems 4" is about the comfortable minimum, lower than that and you really have to baby it over bumps and pot holes.
      1965 Falcon Hardtop

      However long you think your project will take, double it and you might be halfway right.

      Build Thread: https://www.pro-touring.com/showthre...847#post798847

    14. #14
      Join Date
      Aug 2011
      Location
      Clearwater/FL
      Posts
      512
      Country Flag: United States
      Imo, the only way you're too low is if you bottom out on the freeway....
      85 monte, drift project- small block t5 and 8.8
      88 Blazer sbc
      05 300c

    15. #15
      Join Date
      Aug 2011
      Location
      Nor Cal
      Posts
      110
      Had a dude that lived across the street with a 64 impala all hydroed out... Some times when he would be getting home he would drop the whole car as he would speed past us... Sparks everywhere. Was dope as a kid... Not so much anymore. Dont be that guy with sparks flying on the freeway!

    16. #16
      Join Date
      Jun 2009
      Location
      Simi Valley, Ca
      Posts
      126

      Air Ride is your ticket if you want a low profile look and drivability.

      Do you think this is too low??? Have you thought of air ride.... I still need to install some bump stops and do minor adjustments to keep it off the ground. Nothing crazy here, just enough to get me ride height and back down to park mode.
      Attached Images Attached Images        
      67 Camaro

    17. #17
      Join Date
      Jul 2006
      Location
      beaverton oregon
      Posts
      392
      Country Flag: United States
      ^ that is looking good! i like all the subtle mods, and the big ones too! channeled the frame? i have the floor cut out of mine right now and channeling over a full frame. setting body at 3.5" off ground (from bottom of rocker, body pinch hammered flat) and frame at 3.25".
      Scott R. (vinny)

      misha widebody SL55 highly modded
      -67 camaro ttls/viper t56, 350z irs, full frame, in the works
      -porsche cayenne turbo 175hp added over stock
      -other crap that just hauls me around!

    18. #18
      Join Date
      Aug 2012
      Location
      Arkansas
      Posts
      20
      Country Flag: United States
      I don't think I will do air ride, but you guys are making me think I need to go lower than 7.5" front and 8" rear of the rocker. Sounds like my 62 Impala could go much lower, but I have a 119" wheelbase and I bet them 1st gen Camaro's are good bit shorter!
      62 Impala SS

    19. #19
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      I'm much more impressed with a low car rolling down the road than with the air dumped in a parking lot. most of the ones around here lay on the ground parked and look stock on the road. I guess it does make a good parking brake though.
      Tom Hensley
      69 ss/rs clone
      98 ta ragtop

      "attack life....it's going to kill you anyway."


    20. #20
      Join Date
      Jun 2009
      Location
      Piqua, Oh
      Posts
      397
      Country Flag: United States
      Quote Originally Posted by SR71 View Post
      I'm much more impressed with a low car rolling down the road than with the air dumped in a parking lot. most of the ones around here lay on the ground parked and look stock on the road. I guess it does make a good parking brake though.
      And a lot harder to tow away.
      Mike South
      1968 Camaro SS/RS LS1/T56
      Ride Tech Tru Turn, Ride Tech T/Q Coil-overs
      Ride Tech 4-link

    Page 1 of 3 1 2 3 LastLast



    Advertise on Pro-Touring.com