Stock D52 caliper with manual brakes?

[woody80z28]

Is anyone running this setup? Do you have enough pedal travel to stop? I removed the stock 2-15/16 cast iron calipers up front and went to a 2-3/8 to help with a spongy pedal and have never been happy with the brakes. Turns out my master was not bled correctly.



Fast forward to now...master is good and the brakes just dont have the stopping power I expected. Larger piston front caliper would add brake torque at the cost of pedal. Is anyone running them with a manual brake setup. Right now I have a 1" master and a 6:1 pedal ratio.