s10 cooling system

[Goatman86]

Im doing this on a project truck that is going to be a daily driver thats a 350 with a mild cam in it. Someone stole the radiator and fan setup the night we bought the truck and it was on the trailor at our motel.

I was told I could use a 4.3 rad or a 86 305 camaro rad. Im sure what to get the electric fans from to make them work right in the truck.

Can ya help me? This is a 84 reg cab auto.

[astroracer]

I use the stock Astro radiator for sbc swaps into those. Never had a cooling issue. I would imagine a stock Astro radiator and shroud would fit but, if you could find a 4.3 Sten set-up you would be better off.
Mark

[Goatman86]

alright

[H2Ogbodies]

I have pics of an 82 S-10 I did a serpentine swap in and used Spal dual 11" fans. I did have to notch the radiator support about 3/4" for clearance between the ps pulley and water pump. PM me your email and I can send you some pics. FWIW, I used a stock type aluminum replacement radiator and retained the AC too-it was a 355 with a TH350 and it would run 190 all day long.

[Goatman86]

Alrighty then

[silvermonte]

might want to give this link a read, its a rad that sits inside the core support cost about $150 and you dont have to do any cutting, the guys over at v8s10 are pretty good, just about anything you need to know about a s10 is in that forum, as long as you use your truck as a DD or a drag truck, other then that you can find most the suspension stuff on this site

http://www.v8s10.org/forum/viewtopic.php?f=46&t=33622

[SparkyRnD]

we're going to be building them for the S10 soon, after we finish the early chevelle / a-body rads.

[Goatman86]

let me know want to use mine for a tester!

[rentedmule]

For fans the Flex-a-lite 210 duals or new model equivalent fits the rad perfectly and doesn't require any additional work for a custom shroud (at least on a second gen). My truck spends lots of time on the rev limiter followed immediately by waiting in staging lanes with no over-heating issues (only a V6 though).

[SparkyRnD]

let me know want to use mine for a tester!

possibly may be interested. A local friend may be buying one, if he doesn't, we should talk.