Just the brackets, please.

[dcozzi]

I bought 120-8080FS and 120-8079FS calipers and need some mounts to complete the installation. The rotors are C4, hubs are Kore3 and the spindles are stock previously modified for a Dynalite 12" Kit.

The radial mounts from kit 140-10486 (1970 Chevrolet Camaro with modified stock spindle) are the ones I need with the accompanying hardware. Does anyone know if Wilwood will sell these a-la-carte??

No luck as of yet with emails.



Dave

[dontlifttoshift]

Yep, just call them and order that part number. it may be worth double checking to see if you need any hardware to go with them.

[dcozzi]

I called the Tech line to get a part # or answer and was on hold forever. Finally, I just hung up.

I'll call the sales line and see if they can flesh out a part #. I looked in the online parts catalog with no luck.



Dave

[dontlifttoshift]

Sorry, I misunderstood, I thought you had the part number for the bracket. As for being hold with Wilwood, that's the way it is, you have to ride it out. The longest I was ever on hold was 17 minutes.

Here are the instructions for that kit http://www.wilwood.com/PDF/DataSheets/ds611.pdf

Check out the exploded view and the parts list. There are notes under the parts list that explain you can get the brackets and related hardware under one part number.

I hope that helps.

[Skip Fix]

Even if they sell the bracket it may not line up the caliper with that rotor offset.

[dcozzi]

Even if they sell the bracket it may not line up the caliper with that rotor offset.

I have a fabbed bracket right now that is straight up from the mounting locations on the spindle and it line up in mockup. Problem is, it is "fabbed" and I want a piece that is machined and purpose built for duty as a brake component mostly for peace of mind. Good call on fitment check though. Otherwise it could turn into a waste of time and $.

[dcozzi]

Donny, thanks a million! Just what I needed.

I feel like a knob for not loading the pdf instructions in the first place.

Oh well.