Results 1 to 17 of 17
Thread: Digi-Tail Issues!
Threaded View
-
07-19-2012 #2
Registered User
- Join Date
- Mar 2006
- Location
- Los Angeles, CA
- Posts
- 450
Double check that the Orange wire for your dome light is actually power. In my 1969 Nova with a Painless harness, the white wire was the power wire. Once you have verified that the orange wire going into your digitails harness has 12v constant, check if your system functions.
If turn/hazard functions do not work, then you can test indexing. Indexing refers to the what terminal on your flashers receive 12v. On most grounded no-load flashers, the terminal labeled "X" needs to have the 12v power when your hazard/turn signals are active. Just use a multimeter and probe the terminals on the fuse block where the flashers go. Just a heads up, painless harnesses are known to have these terminals switched.
Good luck! When you get them running, I know you will love them!
Don
-
Reply With Quote
