Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Thread: 1972 RS Camaro

    1. #1
      Join Date
      Oct 2005
      Location
      Toronto
      Posts
      1,465

      1972 RS Camaro

      Well gang it's time to thin things down and start "a few new Radical builds" so my soon to be feature 72RS is on the block... The car is a really nice street warrior that has received some pretty nice accolades such as being a 2009 optima Ultimate Street car participant, Won 3rd place at the 2010 GM Nationals in Carlisle and is now soon to be featured in "Chevy High"....



      The car itself was purchased from Salmon Idaho in 2007 and was a rust free car that we totally striped to a bare steel carcass and proceeded to work the build plan from there... We widened the rear quarters in a very subtle fashion by 1 1/2" on each side and most people don't even catch the modification... This was done to accommodate 315's at a lowered height without mini-tubes and to make sure the cars stance was correct.. The car was so clean that we decided to utilize the stock sub-frame and work with springs and shocks to create a real nice street car that would run on pump gas and leave nothing on the table as far as quality parts in the drive line..... Hence the engine is a beauty that highlights out as follows...

      -555ci aluminum Dart Block
      -Calies Magnum XL Ultra light
      -Oliver I beams
      -Polished Brodix BB2 CNC heads
      -Jesel comp 1.8
      -K-motion springs
      -Port matched Polished Brodix Intake
      -Custom built stepped & coated Headers and 3 1/2" oval spin tech exhaust
      This all backed up with an aluminum 14 flywheel, Keisler prepared TKO600 with McCloud dual disk, an aluminum Dyna-tech 3 1/2" Drive-shaft and a Mosier 12 Bolt with an Eaton Carrier.... In other words this pump gas drive line is set on ""KILL""
      The interior was treated to custom seats (modified Audi A-4) and a custom dash bezel that is covered in a prize winning Burled maple veneer with AutoMeter gauges...
      Asking $90,000USD call Albert 416-566-9660





      Last edited by tazzz25906112; 06-18-2012 at 03:27 AM.
      Carbon Kustoms Limited
      A.K.A. Albert from Toronto


    2. #2
      Join Date
      May 2009
      Location
      Morehead City, NC
      Posts
      76
      Country Flag: United States
      Albert, I love this car! It was one of my main inspirations to build my 72 Camaro! Someone is going to get one bad-to-the-bone Camaro. Good luck with the sale!
      Bobby Jones
      68 Z/28
      72 Camaro RS SS PT
      73 Camaro RS project

    3. #3
      Join Date
      Oct 2005
      Location
      Toronto
      Posts
      1,465
      Thanks Bobby....
      Carbon Kustoms Limited
      A.K.A. Albert from Toronto

    4. #4
      Join Date
      Aug 2005
      Location
      Hamilton, NJ
      Posts
      4,317
      Country Flag: United States


      this car makes the most devilish sounds out the tailpipes.
      Scott from NJ.

      Vent Windows Forever! ...

      Feather-light suspension, Konis just couldn't hold
      I'm so glad I took a look inside your showroom doors

    5. #5
      Join Date
      Oct 2005
      Location
      Toronto
      Posts
      1,465
      Carbon Kustoms Limited
      A.K.A. Albert from Toronto




    Advertise on Pro-Touring.com