Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Hybrid View

    1. #1
      Join Date
      Feb 2005
      Location
      SouthTX
      Posts
      1,233
      Country Flag: United States

      Starting project on 70 Chevelle

      Picked up a very nice rolling chassis 70 Chevelle
      http://cgi.ebay.com/ebaymotors/ws/eB...ME:B:EOAB:US:6 . Now I am starting the planning stages for the drivetrain and suspension. I had narrowed it down to the oem frame + GW goodies front and rear, 6 piston Wilwoods, 502 or 540 with a centrifugal Supercharger & 4l80e. Then I see this on eBay and wonder if my original plans should now change. I need some opinions please on the advantages and drawbacks of this frame on ebay. Are there better frames for less money out there? I already have the brakes and some suspension parts.

      http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1



    2. #2
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      I thought you were selling that thing? I change my mind sometimes too. Maybe Craig Morrison will chime in with a honest opinion. If I am not mistaken it is about half the price of the AME chassis. Seems like it will be weak firewall forward, looks plenty strong on the side double rails. I would have tied the center rails to one another with small hoops in the driveshaft tunnel.
      Anyway, if you decide to build, I can help you with a few of the items you mention.

    3. #3
      Join Date
      Feb 2005
      Location
      SouthTX
      Posts
      1,233
      Country Flag: United States
      Yea, I changed my mind. The body is too nice to let go without trying something first. I had a budget of $35k, less 10K for the car, less $3K for new interior, Autometers, power windows, ect. That leaves $22K for everything else. Anyway, that aftermarket frame looks substantially heavier than the oem frame? Thats drawback #1.

    4. #4
      Join Date
      Aug 2004
      Location
      Henderson, NV
      Posts
      218
      Man only 22k left and you want a blown 540! Tight budget. I have a bunch of stuff for sale from my 70 Chevelle SS in the for sale section including a pretty substantial motor for cheap. Let me know if you need anything. Good Luck with your project.

      1970 Chevelle parts for sale

      Shane
      Shane Wagner
      1970 Chevelle "Cholula"
      2010 Camaro "Proven1"

    5. #5
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      Quote Originally Posted by 4MuscleMachinesMan
      Anyway, that aftermarket frame looks substantially heavier than the oem frame? Thats drawback #1.
      I bet it is not much heavier, if at all once you box a stock frame. And yes you should box a stock frame. I just do not think 2 X 3 hanging out front is strong enough for a G machine or a car with no Jungle Jim cage.

      Also, it does not seem to be narrowed at all for more tire, front or rear.

    6. #6
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Well, the picture quality sucks, so I'll provide an equally blurry opinion.
      -I would start right there. Get the guy to email you some better detail pix of the suspension
      -It appears to have nice Coleman spindles and big "stock car" hubs
      -It has a nice rack with pivot points that match the inner pivots of the LCA's. That's a step in the right direction towards good bumpsteer.
      -I personally prefer wishbone style LCA's instead of the multi-link format shown.
      -As Frank stated, the frame lacks X-member or crossmembers. So count on adding them as well as some kind of roll bar/cage to finish off the chassis.
      -The upper shock mounts allow for nice long coil-overs, but again--plan on tying those supports into down bars coming from a roll cage thru the firewall for best results.
      -All that fab work and the guy went with a converging four bar rear suspension instead of some sort of panhard bar setup. Why? The rear suspension is probably no better than stock.
      -Plan on spending money on custom exhaust--maybe custom headers.
      -I see no mention of tubing grade. Be sure to ask what it's made out of.
      -The biggest question mark is geometry. There is simply no way of knowing if he got it right other than to take him at his word. The 1970 geometry/frame design is by no means ideal, but at least you get a baseline. The Hotchkis A-Body suspension upgrade works very well and is one of the few, true "bolt-on" mods in existence. Box the stock frame and add a basic rollbar, install Hotchkis parts and the only reason left to venture into this unchartered territory is because it looks trick and offers R&P steering.
      If you're taking a "blank check" approach to this build, I say go for it, but ask him if he can do a true four bar with PHB.
      If you are on ANY sort of a budget, I say run away--as fast as you can.
      /Steevo
      ________________
      Steve Chryssos

    7. #7
      Join Date
      May 2005
      Posts
      17
      If it were me, I wouldnt waste my money on that chassis. It doesnt look very well designed to me. I wont bother stating my reasons as there are already plenty above.

      Michael




    Advertise on Pro-Touring.com