Paddle shifter help

[cbernhardt]

Thanks for your reply.
My plan is to use the original steering wheel, which brings some other questions.

1. The steering wheel is 17" in diameter. Does your paddle shifter have adjustable paddles that would extend out far enough.

2. In the picture in my first post you can see that the steering wheel is attached to the hub with rivets. There are 6 rivets on a 2-7/8" diameter pattern. The horn button normally covers these rivets. The horn contact ring is held with three screws (you can see two of them in the picture) and the horn button is held inside this ring. Would I be able to use the original horn button and contact ring?

3. The original steering wheel hub is 1-3/4" deep. Would your adapter be any thicker?



Charles