Results 1 to 15 of 15
Thread: MINITUB?? or NOT???
Hybrid View
-
09-02-2004 #1
Registered User
- Join Date
- Apr 2004
- Location
- Yuba City, CA (bout 1/2 hour north of Sacramento)
- Posts
- 818
Thanks for the feedback
thanx for all the feedback guys its been useful the guy just finished a 69 Camaro that turned out nice and it was allready painted but Im still VERY hesitant because the car just got out of the paint shop (still needs to be cut and sanded final detail after interior is complete) and you guys pretty much agree with me that I should have done it before paint and since Im on the West Coast I can count out DSE (besides it would probably cost me alot more than the $1,500 this local guy quoted me)....dillemas suck! :bsjerk:
J.T.
-
09-03-2004 #2
Registered User
- Join Date
- Sep 2001
- Location
- Rochester, Minnesota
- Posts
- 1,410
Ralph, the problem wasn't so much getting in to the trunk, it was getting back out again!! LOL!!
09-03-2004 #3
Banned
- Join Date
- Nov 2003
- Location
- Maine
- Posts
- 1,076
viper
i would go ahead and do it, if it has not been cut and buffed yet, it can be touched up easily, especially if nothing is really assembled, just make sure they tape all edges with 2-3 layers of tape and use soft cloths on rear panels etc so when i air hoe rubs on it, really doing alot of the work inside the wheel well and car, so it can be done alot easier than other things after paint, go for it!!
jake
Reply With Quote
