Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 41

    Hybrid View

    1. #1
      Join Date
      Aug 2004
      Posts
      1,464
      Country Flag: United States

      Ride tech ride tech ride tech...

      Well I have yet another Ride Tech question that Tech support has left me hanging on... I called because I had a question on the upper arm bars in the rear... Called Tech support at 5:30 and asked what I thought was a simple question.. I have the upper arms that have a spherical end on ONE END.. The tech told me that the end with the spherical end on it (also where the adjustment nut is) should be connected to the tabs on the AXLE BUT when I looked at the 48 hour CAMARO build on youtube, it clearly shows it going into the CRADLE portion with a couple of aluminum bushings beside them.... OK so I was told to go online and look at the directions... told the tech they do no show it in the directions with Spherical ends they show it with the same hard BUSHING ends even checked the camaro installation pages with and without double heim joints the pictures and directions are the same...... So the tech tells me that he will have to go out back and CHECK them out to see and that he will call me right back... Hey guys, I know it was 5:30 and I didn't know you close at 6:00 BUT when you tell someone your gonna call them back, if you don't plan on doing it until the next day then you should at least give them the courtesy to say "hey I may not be able to get back to you today cause we close at 6pm but Ill get back to you tommorrow"... instead of just blowing it off all together and potentially have someone sitting in their shop waiting for you to call them back (like I did!!!). Just pisses me off that I had to call back after an hour to find out that everyone had gone home for the day...

      BRET has been great in the past but I know that when you own your own business you are going to care more than anyone else and BRET obviously does due to the fact that I have seen him comment on here before WAAY after hours. He is the man for sure but this has been frustrating to me cause its the SECOND time during this build that this has happened to me with TECH SUPPORT..... ANYWAYS, can someone steer me in the right direction on how these arms go in? Is the "48 hour camaro" video ON YOUTUBE right having the spherical rod end go into the CRADLE with the adjustment nut OR does that spherical end and adjustment nut go into the axle tabs? BTW I have a MOSER axle with the tabs already installed so that is gonna be a big help. Oh and if you answer back BRET please know I am not trying to trash your company. As an owner of a business myself I would want to know if someone or something needed to be addressed in my operation.



      Thanks in advance

      Mark
      TOOFUN


    2. #2
      Join Date
      Sep 2006
      Location
      Henderson,NV
      Posts
      2,870
      Country Flag: United States
      I can't see where it would make any difference from a performance standpoint. They are just trying to decrease harmonics through the chassis by using a poly end and spherical vs. spherical/spherical. It will be easier to adjust pinion angle/alignment with the rod ends on the chassis.
      Todd

    3. #3
      Join Date
      Aug 2004
      Posts
      1,464
      Country Flag: United States
      So are you saying that I should just go ahead and put the spherical end the way that the 48 hour camaro had them in the CRADLE not on the AXLE tabs?

    4. #4
      Join Date
      Apr 2006
      Location
      Des Moines, IA
      Posts
      602
      Country Flag: United States
      The mounts are the same width so it does not matter which way the bars go in. Like Todd stated we are just trying to decrease NVH while maintaining maximum performance you can live with daily by using one rubber bushed end and one solid end.
      We installed the bars in the 48 Hour car with the adjusters on the AirBar side as it's easier to get a wrench in there.

      I apologize for the lack of technical information in both the instructions and our staff. As you may have noticed our directions/installation instructions are incorporating a lot more CAD drawings to help the installer. Unfortunately sometimes our "performance team" moves faster than our "instruction team" can keep up with!

      In that regard we have been working diligently on creating animated instructions using our CAD system that will show the installer exactly how we put everything together. . .we are just a bit behind.

      I'm sure Bret will be on here shortly to respond, which means I'll get an ear full tomorrow morning!

      Thanks for keeping us on our toes. Our physical parts are only a portion of the solution you are purchasing and as such everything should be perfect.

    5. #5
      Join Date
      Feb 2007
      Posts
      1,402
      Country Flag: United States
      I must say that every time I contact ride tech its positive, with that said I just swapped my regular bars ( on heim one rubber) with the newer bars that have the heim joints on both ends. Now my car is a sec gen camaro but shouldnt matter for this.

      I installed the bars with the heim joint in the cradle not the rear end. if you place the heim on the rear end you cant get a wrench on it to tighten if you are adjusting the pinion angle. So you will need to put the heim in the cradle side. as stated the ends should be the same width so switching them should not be a problem.

      Hope that helps
      Brandon Slater

      1979 Z28
      1972 Nova
      2015 2500 silverado crew cab duramax

    6. #6
      Join Date
      Oct 2004
      Location
      Indiana
      Posts
      1,371
      I saw this post last night as I was spending time with my wife and kids. I thought about responding...I actually composed a couple of responses, but deleted them until this morning.

      Mark, your tech question inspires a couple of my own.

      1. As a fellow business owner, at what time do you allow your employees to go home?

      2. As a fellow business owner and hotrodder, how do you survive either activity without the simplest of problem solving skills?

      As you call me out in CAPITAL letters, you proclaim to not want to trash me or my company.

      Bull****.

      If you want to pick a fight with with someone at my company, you better start with me because my employees are way over your head.

      I happen to know that Brit Marolf who responded to your attack on us last night, put aside babysitting his baby daughter to offer a most gracious response.

      I do not know who you talked to here yesterday at 5:30 in the evening. It could have been Darren...he went home at 6:00 to care for his newborn daughter and ill wife.

      It could have been Rodney, who went home at 6:00 to prepare for this weekend's JDRF benefit because his daughter is a severe diabetic.

      It could have been Kyle, Danny, or Jeremy, who went home at 6:00 as well to attend to wives, girlfriends, children, lawns, leaky faucets, and laundry because they will be working ALL WEEKEND in Nashville at Goodguys this weekend.

      While your question is important...you paid for a product and you deserve all the technical support possible to get it installed and enjoy it...it is not as important as the dignity and well being of my employees and their families.

      I hope you see fit to make sure everyone on this forum and many more see how you've been treated here. Its who I am, its what I do, its what I beleive.

      We will bend over backwards for our customers...we will not bend over forwards.
      Bret Voelkel
      Director of Innovation Fox Powered Vehicles Group
      Founder/ Former Owner
      RideTech/Air Ride Technologies, Inc.

      How do you spell Impossible?

    7. #7
      Join Date
      Aug 2004
      Location
      Alabama
      Posts
      299
      Quote Originally Posted by bret View Post

      We will bend over backwards for our customers...we will not bend over forwards.
      I'm going to remember that quote. It goes well for some of my customers.

      I don't own even a single ridetech part, but as a business owner, I admire their business model and dedication to customer support. Keep up the good job.

    8. #8
      Join Date
      Oct 2009
      Location
      Texas
      Posts
      37
      Nicely said!!

    9. #9
      Join Date
      Sep 2006
      Location
      Henderson,NV
      Posts
      2,870
      Country Flag: United States
      A prime example of the customer IS NOT always right. At some point you have to stick up for yourself and end a relationship with a client. Good for you Brett.
      Todd

    10. #10
      Join Date
      Mar 2005
      Location
      St George Utah
      Posts
      1,243
      Country Flag: United States
      We will bend over backwards for our customers...we will not bend over forwards.

      this will be hung on the wall in the front office by friday.
      best quote i have heard in along time
      Blake Foster
      www.speedtechperformance.com
      435-628-4300
      St. George Utah.
      it's always sunny here.

    11. #11
      Join Date
      Feb 2002
      Location
      Santee, CA
      Posts
      387
      Country Flag: United States
      Bear in mind that my only exposure to this issue is what is posted above. Based on this, all I see is a frustrated customer.

      The two things I pulled from the original post is that the instructions don't match what he is installing and that tech support promised a return call, but failed to do so. I don't understand how that has any impact on the dignity and well being of your employees and their families. If someone said they would call back, they should do so, even if they don't yet have a solution.

      A couple of months ago I had an issue with an engine I bought from Summit racing. They said they would look into it and get back to me. Later that evening, I got a call to say that they were unable to resolve, but would follow-up the following day. While I wasn't happy that the issue wasn't going to be resolved that night, I was glad to have gotten the follow-up. I don't think there is any problem in returning a call to say that you are still working on the problem. This 5 minute investment only strengthens the customer relationship.

      After I read Brett's reply, I went back and read the original post. I'm sorry Bret, I see frustration, but I don't see someone trying to pick a fight. While I do think that the thread needed a response, an attack against one of your customers is not the path I would have chosen. No, I'm not a business owner, but I do have a few years of customer service experience (and lots of years experience as a customer!). I am still confident that this relationship can be salvaged, but the actions that follow are going to be pivotal. As a potential customer, I am curious to see how/if the situation will be resolved.

      ---Eric

      By the way, I think this might be a more pertinent quote:
      "The purpose of business is to create and keep a customer" (Peter Drucker's, not mine)

    12. #12
      Join Date
      Aug 2004
      Posts
      1,464
      Country Flag: United States
      Quote Originally Posted by esenior View Post
      Bear in mind that my only exposure to this issue is what is posted above. Based on this, all I see is a frustrated customer.

      The two things I pulled from the original post is that the instructions don't match what he is installing and that tech support promised a return call, but failed to do so. I don't understand how that has any impact on the dignity and well being of your employees and their families. If someone said they would call back, they should do so, even if they don't yet have a solution.

      A couple of months ago I had an issue with an engine I bought from Summit racing. They said they would look into it and get back to me. Later that evening, I got a call to say that they were unable to resolve, but would follow-up the following day. While I wasn't happy that the issue wasn't going to be resolved that night, I was glad to have gotten the follow-up. I don't think there is any problem in returning a call to say that you are still working on the problem. This 5 minute investment only strengthens the customer relationship.

      After I read Brett's reply, I went back and read the original post. I'm sorry Bret, I see frustration, but I don't see someone trying to pick a fight. While I do think that the thread needed a response, an attack against one of your customers is not the path I would have chosen. No, I'm not a business owner, but I do have a few years of customer service experience (and lots of years experience as a customer!). I am still confident that this relationship can be salvaged, but the actions that follow are going to be pivotal. As a potential customer, I am curious to see how/if the situation will be resolved.

      ---Eric

      By the way, I think this might be a more pertinent quote:
      "The purpose of business is to create and keep a customer" (Peter Drucker's, not mine)
      Nicely said Eric and SPOT ON ACCURATE to what I was feeling.....

      Bret...... DO SOME RESEARCH BEFORE YOU OPEN YOUR BIG FAT MOUTH!! I am not the only one that COMPLAINTED about ridetech customer service NOT RETURNING CALLS!! Plenty of others have too.. LOOK IT UP if your competent enough to. I didnt come out and attack you personally like you just did to me. ridetech sent me wrong parts... (TWICE!!!) did I complain before? NO cause they took care of it (took two times but still), I have had RIDETECH tech support not call me back before also.. again no complaint as I figured it out (using my SIMPLE problem solving skills as you so eloquently put it). Customers pay ALOT OF MONEY FOR YOUR SH*T AND MOST OF US ARE GARAGE MECHANICS SO SORRY IF SOMETHING GOES WRONG AND I HAVE THE NERVE TO COMPLAIN ABOUT IT!!! Thanks to members on this board and the response by one of your staff last night, I was able to get the answer I was looking for. A THANKS WOULD HAVE BEEN ON THE WAY BUT you never gave me the chance, just started firing away.... So what did you do now? Lost 1 customer for life for sure and burned a bridge in my community cause anyone who sees my car is gonna get a copy of my so called "attack" with your response with it. Already showed it to a few shops this morning and they all couldnt believe that kind of response from a supposedly PRESIDENT of a company.

      TOM... What you just saw BRET do was not leadership... it was a statement from someone with no CHARACTER but plenty of ARROGANCE!!! There is a difference. When you deal with customers that are paying alot of money for a product and they have problems with customer service, you should deal with it in a manner that not only cost you a customer, but in a way that doesnt cost you POTENTIAL customers that person may be involved with.. He may look like a big man in your eyes, but that was not a smart business decision.... NUFF SAID.

    13. #13
      Join Date
      Dec 2009
      Posts
      261
      Country Flag: Canada
      Quote Originally Posted by toofun View Post
      ... So what did you do now? Lost 1 customer for life for sure and burned a bridge in my community cause anyone who sees my car is gonna get a copy of my so called "attack" with your response with it. Already showed it to a few shops this morning and they all couldnt believe that kind of response from a supposedly PRESIDENT of a company.

      TOM... What you just saw BRET do was not leadership... it was a statement from someone with no CHARACTER but plenty of ARROGANCE!!! There is a difference. When you deal with customers that are paying alot of money for a product and they have problems with customer service, you should deal with it in a manner that not only cost you a customer, but in a way that doesnt cost you POTENTIAL customers that person may be involved with.. He may look like a big man in your eyes, but that was not a smart business decision.... NUFF SAID.
      Win some lose some, as you can see he won a lot more respect (thus business) here than he has lost.
      A man who'll not kowtow because someone can type all caps and make sidelong accusations (thirty minutes? this isn't a pizza) earns a lot of respect in my, and clearly others, books.

    14. #14
      Join Date
      Aug 2004
      Location
      Alabama
      Posts
      299
      Quote Originally Posted by esenior View Post
      tech support promised a return call, but failed to do so
      The real issue is going on a forum an bitching after giving tech support 30min to find the answer. Even after going to the manufacturers website and seeing how they were installed on their OWN CAR IN THEIR OWN SHOP. Any poking around would show that ridetech has a pretty good reputation for solving customer problems. Give them the chance.

    15. #15
      Join Date
      Aug 2004
      Posts
      1,464
      Country Flag: United States
      Quote Originally Posted by barraza View Post
      The real issue is going on a forum an bitching after giving tech support 30min to find the answer. Even after going to the manufacturers website and seeing how they were installed on their OWN CAR IN THEIR OWN SHOP. Any poking around would show that ridetech has a pretty good reputation for solving customer problems. Give them the chance.
      Another person that missed the point completely or at least didnt read the entire original post........oh and although that is a funny quote, I dont thing ANY OF YOU would be in business very long if you told all of your customers to essentially go fvck themselves...Mentality like that is why alot of people drop in and out of this business and very few survive. Half of you shops commenting probably wont be around 10 years from now with that attitude..

    16. #16
      Join Date
      Sep 2010
      Location
      corona,ca.
      Posts
      1,132
      Country Flag: United States
      I think bret should not had been so blunt,but in your post you did write his name in capitals which i hope was not to bash him.i do like more respect when im craping that much cash on parts.as for brets workers having to go home to wifes,kidsetc. Ive had to stay over countless times to machine or weld something because some bottlers line went down,you have to keep the guys happy and deal with there problem thats how it is.mind you bret is a cool guy,i think i would be angry too when we are in an economy like this we do spend when other cant on items we really dont need but like to have as hobbies.im not taking bret or your side just my .002 .maybe next time if any of us have a problem with a vendor we should pm them direct so it doesnt get ugly like this next time.phil

    17. #17
      Join Date
      Aug 2004
      Location
      Alabama
      Posts
      299
      Quote Originally Posted by toofun View Post
      Another person that missed the point completely ........oh and although that is a funny quote, I dont thing ANY OF YOU would be in business very long if you told all of your customers to essentially go fvck themselves...Mentality like that is why alot of people drop in and out of this business and very few survive. Half of you shops commenting probably wont be around 10 years from now with that attitude.
      Ok Mr Brilliant, how about telling the story with proper sentence structure, punctuation, and in English so us simpletons understand. It sure reads like you are bitching about ridetech after giving the tech 30 minutes to get you an answer. Did you really think someone was going to stay late to get you the answer instead of getting back to you during business hours? For all anyone knows, the tech headed back to the shop to get answers for several questions that had been asked that day. Was it worth going to a forum to vent so quickly? I obviously can't speak for ridetech, but it is tiresome seeing the forum bitch sessions for things that a vendor hasn't had a reasonable chance to fix. Not to mention that your complaints will exist forever out on the web.

      BTW, my business has been going strong for 20 years.

    18. #18
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by barraza View Post
      it is tiresome seeing the forum bitch sessions for things that a vendor hasn't had a reasonable chance to fix. Not to mention that your complaints will exist forever out on the web.
      I agree, nobody learns from that

      I would like to be the first to ask for this thread to be closed
      Thanks

    19. #19
      Join Date
      Sep 2006
      Location
      Henderson,NV
      Posts
      2,870
      Country Flag: United States
      Quote Originally Posted by esenior View Post
      ---Eric

      By the way, I think this might be a more pertinent quote:
      "The purpose of business is to create and keep a customer" (Peter Drucker's, not mine)
      In a perfect world, that makes sense. In the real world, their are certain people that you don't care to keep as clients. As I always say, you can't be everything to everybody.
      Todd

    20. #20
      Join Date
      May 2007
      Location
      Mooresville, Indiana
      Posts
      1,874
      Country Flag: United States
      I have never run a successful business like ridetech, but I do know a little about leadership and Bret just showed that he does too.

      Tom

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com