69 Alignment specs?

[gen3bu]

First off.......

1) You are not going to get more than +3.5 caster in a stock subframe with stock UCA/LCA's. Were not dealing with a third gen.

2) That isnt near enough static negative camber to help with the associated tire wear.... from the stock geometry not actually having a working camber cure to begin with. This is 35+ year old geometry were dealing with. Where not dealing with a third gen.

3) And a second, third or fourth gen are not anywhere near the same geometrically (suspension-wize). And an alignment spec from one will not work with the other.

4) Were not dealing with a third gen.....

i understand that we are not dealing with a third gen. it is a 69 as stated in the title. i also understand that all gens of f-bodies are different. re-read the first sentance again (IT DEPENDS ON THE CAR AND DRIVER). I GET THE HINT. anyway my dd is a 1993 sonoma. it you want some extra caster get some offset cross shaftsand play with the alignment.



oh by the way its not a third gen - chill out, i put that in as an example. if you are determined you can make anything happen!