Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Hybrid View

    1. #1
      Join Date
      Feb 2010
      Location
      Mooresville IN
      Posts
      20
      Country Flag: United States

      Camaro t5 Swap!!! Speedometer Help

      94 camaro v6 t5 behind my 94 s10 with a 2.2. The reluctor ring from the s10 is slightly to large to fit the output shaft and also wont clear the housing.

      I have searched for a while now and cant come up with a definite way to get my speedo working without spending the money on a dakota digital box or rear axle mounted reluctor ring (which looks cheesy to me to say the least). My stock trans used a 40 tooth reluctor, but the camaro trans uses a gear on the output shaft and another on the end of the sensor.

      I am cheap and if there is another way thats cheaper I am game.



    2. #2
      Join Date
      Feb 2010
      Location
      Mooresville IN
      Posts
      20
      Country Flag: United States
      After doing about 8 hours of research, there looks like 3 possibilities.
      1. Dakota Digital converter
      2. Axle mounted reluctor
      3. I can move the reluctor up farther on the shaft, and shim it to fit. Then I have to drill and tap a hole in the tail housing for the sensor.

      I am just going to do the reluctor on the axle. Would be alot less work than removing the tail housing from the trans with it in the truck.

      With the last 2 options, that will also give me the ability to use another vss for the 60°v6 swap I am gathering parts for.

    3. #3
      Join Date
      Dec 2010
      Posts
      708
      It may be modern-ghetto, but I just use my Blackberry with the Speed-O-Meter app (two bucks). I stick it on the dash with Velcro, and I get nice, GPS speed readings, when I want them. Otherwise, I just drive on the tach...

    4. #4
      Join Date
      Aug 2011
      Location
      Clearwater/FL
      Posts
      512
      Country Flag: United States
      Quote Originally Posted by rustomatic View Post
      It may be modern-ghetto, but I just use my Blackberry with the Speed-O-Meter app (two bucks). I stick it on the dash with Velcro, and I get nice, GPS speed readings, when I want them. Otherwise, I just drive on the tach...
      Lol, I don't use speedo either......
      85 monte, drift project- small block t5 and 8.8
      88 Blazer sbc
      05 300c

    5. #5
      Join Date
      Feb 2010
      Location
      Mooresville IN
      Posts
      20
      Country Flag: United States
      It was making the truck bog out pretty bad from about 2000 rpm to about 3500 rpm. I installed the diff mounted reluctor today, and it seems to have solved everything, no more bog, no more code 16. It might look cheesy but it really does work.

      I have been using an old android phone for my speedo for the last week, I keep it in the truck anyway as its my music player. It's ghetto fab, even use the stock tape deck and cassette adapter lol.

      Atleast now I have one less thing to worry about when I do the v6 swap as I can still have another vss for that system and maintain my stock gauges.




    Advertise on Pro-Touring.com