1976 Trans Am Resto-Mod

[ryeguy2006a]

The engine that I am using is a 1973 Pontiac 400 that has been mildly rebuilt. It has been bored .030 with TRW postions, stock rods and crank. The heads are 6x-8 and an aluminum Edelbrock P4B intake. I have several pictures of the various carbs that I have run on my car, when I finally settled on a Holley 750 DP.

Here is what I started with



All cleaned up and ready for some paint.




Painted Pontiac Blue, if you look closesly you can see the cross hatches from the rebore.


All cleaned up and back in the car.




Here is my engine with the stock quadra-jet.


And with the 600 Edelbrock carb,


with the 850 Holley DP race carb, Way too much for this engine.



And finally I settled with the 750 DP

Here is a picture of the Borg Warner Super T-10 all cleaned up too.