Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Hybrid View

    1. #1
      Join Date
      Feb 2007
      Posts
      1,402
      Country Flag: United States

      Clutch pedal STOP ?

      Whos is running a clutch pedal stop and what are some ways that you acheived this?

      I have the ATS clutch master bracket and have relocated the rod to be straight woth the master cylinder but would like to see how people have built pedal stops.



      My car is a 79 Camaro

      Thanks
      Brandon Slater

      1979 Z28
      1972 Nova
      2015 2500 silverado crew cab duramax


    2. #2
      Join Date
      Jul 2006
      Location
      Pensacola, FL
      Posts
      1,265
      Country Flag: United States
      In my 69 camaro I made a stop out of a piece of gate latch i had laying around & fastened it to one of the bolts for the steering column firewall plate. I then glued a piece of rubber on it. I have seen stops welded to the bottom of the clutch pedal. I don't weld, so that option was out for me. I have a year and 4000 miles on it so far without a problem. Once the linkage is assembled you can see where the pedal stops. Depending how far from the floor/firewall it stops, you can devise a plan to make a stop for it. Hope that makes sense. Scott

    3. #3
      Join Date
      Oct 2007
      Location
      Atlanta
      Posts
      430
      Country Flag: United States
      I was thinking of using something like an adjustable hood stop and screwing it through the firewall. In my case it's a throttle pedal stop though. I set my pedal very high to line up better with the brake pedal (heel toe is much easier) and I bottom out the cable at the carb end way before I hit the floor.


    Advertise on Pro-Touring.com