1978 nova

[ron c]

here is the car i am building 1978 chevy nova two door, is my first car that i got in 1989 was my work car for 9 years, stated out as 305 with th350, i later installed a gm create motor 350ho 330hp drove it that way for 5 years and then installed a 200r4over drive, about a year later i deside to redo the car, only problemat the time i had to do it in my brothers front yard,removed the a/c and heater box filled in the hole with a plate from dse for 74 and back nova, it worked, then i deside to make the car in to more of a handling car, so i got a t45-rs 5 speed for it, i found a place that i could work on it inside, put the sub frame back in it so i could move it to the shop, here are some more pics of my taking it back apart, and thanks to all the guys in chat room for helping me,

[NOT A TA]

Looks good Ron! Nice to have a big indoor space to work now eh?

[ron c]

yes it does

[craigs73]

looking good ron! now that you got a place to work you can get more done on it

[SLO_Z28]

You will like rowing through the gears with that trans! Keep us updated.

[ron c]

plans have changed, i got a killer deal on a 2005 5.3ls that has 8000 miles so it going in with th350 that was in this car before, here some pic of the test fit, using carshop plates, next i have to do is get cst-v oilpan

[johnny68]

good job Ron keep it up
john

[CruizinKev]

good work so far!!

[cobragt]

You could always clone this. http://www.cardomain.com/ride/214853...chevrolet-nova

[ron c]

this why i need cts-v oil pan,still have to get the rights springs, just have set of old stocker that been cut down

[ron c]

got my cts-v oil pan set-up on, here some pics, my exhaust mainifolds are on back order from hooker headers

[craigs73]

looks good ron......hey check out steves for ls front brake setup for sale!!

[ron c]

my brother fixed the hole in the trans tunnel, found 4 speed hump from 77 4 door next is grinding and seam sealing

[ron c]

found my seats from 95 firbird

[ron c]

got the 5.3 tested and got the control arms intalled

[AusMarty]

Ya gonna leather trim those seats or are you gonna go for a full 90's appeal?

And wow.. LOW clearance on that Sump.

Coming along nicely.

[ron c]

looking like car again, got fenders and hood back on

[SparkyRnD]

looks like a good start to a fun project.

[ron c]

small update got a 2004 4.8 after I found out the 5.3 that I have had a rust in number one hole so it will have to be rebuilt, got the holley front drive set up very nice system, and edelbrock 80 mm throttle body and psi wiring harness and ecm and running hooker exhaust manifolds , been looking at new Muncie 4 speeds I deside to run m22w from 5speeds.com he builds new one with super cases and if I want a over drive later I will get a gearvenders

[ron c]

test fited the 4.8 in my nova this weekend so I can mock everything up tanks inc just starting selling a efi ready tank for the 75-79 x-bodys will be get one of them soon too