1967 Camaro Driver Side Inner Structure / Rocker

[oestek]

OK, so we're going to buy the driver side inner structure from Classic Industries, but we don't need the rocker, part of the roof, and front sections, so we're checking to see if anyone is interested in these pieces of this section. Their part ('68, '67 pic not shown on their site): http://www.classicindustries.com/cam...rts/c2351.html

We'll separate them at the factory spot welds so you can install cleanly.

The RED part will be available.

The entire section is over $900, so we're just trying to recoup some of the investment for a customer. The complete rocker panel sells for about $140, plus the front cowl pieces, A pillar, etc. We'd take $300 / best offer for the whole red section. PM me if you are interested, or call six one eight 4 one zero 2 4 three one. Located near St. Louis in IL. Thanks!

[oestek]

We still have most of this piece, the rocker has been trimmed, but the front door brace and upper part are still available. Make us an offer!