Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 2 FirstFirst 1 2
    Results 21 to 23 of 23

    Hybrid View

    1. #1
      Join Date
      Aug 2008
      Location
      Charleston, SC
      Posts
      354
      Quote Originally Posted by shepherd1 View Post
      Yeah I'm over on the Pontiac Zone forum also, I'm working with Jeff Palazzo he owns Mayhem Turbos and he runs a stock 455 block, cat rods, stock crank, and cast iron heads with his and makes over 1,000hp for over 5 yrs with no problems. Also talk with Jeff Kauffman a lot also. I plan on using a forged crank, a set of extreme duty I beam rods rated at 1,500hp. Oh and forgot to mention Jeff's 455 is a 2 bolt main block. I'm not going to run the car @ full boost all the time, just at the track.
      You'd think Jeff would run one of his own blocks. Between the lifter bore problems and the thin webbing area around the mains, I wasn't comfortable with a stock block. Maybe you'll have better luck holding it together.



    2. #2
      Join Date
      Dec 2011
      Location
      Bowling Green,OH
      Posts
      18
      Country Flag: United States
      The 400 has pretty thick mains compared to a Chevy motor. I'm going to running a liter bore brace, that is a bad part of the Pontiac blocks when you run a big cam. Jeff at Mayhem Turbo isn't Jeff Kauffman it's Jeff Palazzo two different guys. As I was saying about the mains being good size is way you can get a 4.750" stroke crank for a 400 3" main and not the 455's. Ohio crankshaft just released a 4.500" crank for a 455.

    3. #3
      Join Date
      Dec 2011
      Location
      Bowling Green,OH
      Posts
      18
      Country Flag: United States
      Well I haven't had much time to do anything with the car, but we did change turbo's went to a S480 83mm set up.

    Page 2 of 2 FirstFirst 1 2



    Advertise on Pro-Touring.com