Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Sep 2008
      Location
      Santiago Chile
      Posts
      23

      Help needed!!!... looking for Frank..

      Hi...

      I´m trying to contact Frank from prodigy customs but apparently his mail is not working , also called him to his store but only the answering machine is working...

      Please if anyone can help me.. I have some question for him on some products and some support for building my car.. a 73 RS camaro (LS/A4)...

      Thanks.



    2. #2
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      I am back, been crazy catching up from PRI Show and sales for holidays. VM was full and PM box, but catching up. Email me [email protected]. Or cal 407 832 1752
      Last edited by ProdigyCustoms; 12-06-2011 at 03:13 AM.

    3. #3
      Join Date
      Sep 2008
      Location
      Santiago Chile
      Posts
      23
      Thank Frank.. good to hear from you..!!!

    4. #4
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Psst..Hey Frank...you have a PM from me also. No hurry, just letting you know to check your box.
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454


    5. #5
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      I see that you took care of it...good job.
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454





    Advertise on Pro-Touring.com