Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8

    Threaded View

    1. #8
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I keep wondering about whether or not you will just make it to the vavletrain noise and still have a problem? I asked about a knock sensor for my efi system and was told that my valvetrain noise would be setting it off and they told me I didn't really need one. You situation is a lot different to a point, the real thing to think about is how you can do it without while you are trying to make it work. Sometimes asking the right questions at the right time to some people can make your life a lot easier, getting something you think you need is customer service, getting what you really need sometimes takes guidance from others to solve the problem and that takes the right questions.

      I worked with a vibration anylist for a while and his saying was "add mass" you could just play around with stainless steel band clamps and place them in different areas on the header to see what happens. You can then easily remove the clamps and know where to put the extra steel and how much. You could also try to make a bracket that would hold the collector area to the engine to make it more ridgid also adding the mass of the engine, but this could also cause another frequency that might not be good?



      Goodluck, problems like this are hard to solve with little money invested, hope it doesn't go too deep for you.
      May The Horsepower Be With You !!!





    Advertise on Pro-Touring.com