Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Hybrid View

    1. #1
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States

      Source for removable roll bar braces ends.

      I have my my standard 4 point roll bar installed, now I need to add a removable horizontal cross bar behind the seats and the angle brace per SCCA rules. I can cut and bend the tubing but I need to locate a source for the weld on tabs and bar ends. Can anyone point me to a source for these?

      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.


    2. #2
      Join Date
      Aug 2003
      Location
      Wanatah, Indiana
      Posts
      486
      chassisworks has them in their catalog.

    3. #3
      Join Date
      Oct 2009
      Location
      New Derry, PA
      Posts
      1,265
      Country Flag: United States
      Steve,
      I'm not sure if the rule has changed recently, but SCCA always required that the diagonal brace was one piece and the horizontal harness bar split around it. Exact opposite of NHRA. I'd check on that if you need to pass SCCA tech...

      Ray Kaufman - Wyotech Chassis Fab and High Performance Instructor. Words of Wisdom from an old master... at Asylum Custom Interiors website


    Advertise on Pro-Touring.com