Suspension 101

[torinoguy75]

Hello

I have a 1975 Ford Gran Torino with a 460cid, C6 trans. I would like to set up my suspension for pro touring. I know that there is not a lot out there in the way of after market control arms and steering boxes. What are some basic things that i can do to make my car handle better? Is there any one that can make or would like to make parts for my car?



thanks

[killer69]

WOW talk about a Challenge!!!

[astroracer]

It's easy to make your car handle better. Do a suspension rebuild with poly or del-a-lum bushings, drop it a few inches and bolt on some wider, lower profile tires. Upgrade to better shocks and add some larger swaybars. You will be amazed at what a few simple changes or additions can do to make your car handle better on the street. Granted it will be no track star but why do you need a 1+G car for a street driver? JMHO.
Mark

[exwestracer]

I love a challenge... I'm just outside Pittsburgh. Bring it down and we can optimize the whole suspension for you...without spending a fortune.

Getting the camber curve right and reducing bump steer are 2 very important elements in consistent handling. Just bolting stuff on because somebody said it's the hot setup is a good way to throw away a lot of money with no good result...

[Bryce]

I love a challenge... I'm just outside Pittsburgh. Bring it down and we can optimize the whole suspension for you...without spending a fortune.

Getting the camber curve right and reducing bump steer are 2 very important elements in consistent handling. Just bolting stuff on because somebody said it's the hot setup is a good way to throw away a lot of money with no good result...

X2 let me know if you want some suspension design help.

[torinoguy75]

thanks a lot guys for all of the tips.

[torinoguy75]

I love a challenge... I'm just outside Pittsburgh. Bring it down and we can optimize the whole suspension for you...without spending a fortune.

Getting the camber curve right and reducing bump steer are 2 very important elements in consistent handling. Just bolting stuff on because somebody said it's the hot setup is a good way to throw away a lot of money with no good result...

Cool thanks. There is a slight problem. My car is in Columbus Oh, I am In Mannheim Germany, and my car is being put back together. Is it better to have tubular upper and lower control arms made for my car? Can you make control arms if i get some old ones?

[exwestracer]

Cool thanks. There is a slight problem. My car is in Columbus Oh, I am In Mannheim Germany, and my car is being put back together. Is it better to have tubular upper and lower control arms made for my car? Can you make control arms if i get some old ones?

Yes, we can make whatever you need. There are also "build-up" arms out there that may work just fine. As I said, I look for the simplest, most economical way that doesn't involve compromising the design.

The main thing is getting all the components in the proper location to keep the tires happy. You absolutely should have a definite tire/wheel combo figured out before anyone does any suspension work.

[torinoguy75]

My wheel and tire combo is boss 335 wheels 18X8 in the front and 18X9.5 in the rear. With nitto NT05's, front tires are 265/35/R18,and rear 285/35/18

[TheJDMan]

exwestracer, PM sent.