Dropped Spindles

[sinned]

Yep, I totally agree. My hope is that someday, someonw will build a modular dropped spindle to fit the "F" and "A" body chassis through the use of different bolt on steering arms. For now all the available dropped spindles have really screwed up steering geometry via improperly designed steering arms.




If any vendors are listening....a 9" mod spindle with a 3" total pin drop and bosses for bolt on steering arms/brake brackets would sell like hot cakes.

[chicane67]

My hope is that someday, someonw will build a modular dropped spindle to fit the "F" and "A" body chassis through the use of different bolt on steering arms.

We're there dude.

Although the drop isnt as much as most would like (I think a combination of spring and spindle is the best route to lower anyway, not to mention to correctly set LCA position) the AFX spindle has the modular ability to do just this....... and we are in the middle of chassis specific considerations for accerman and bumpsteer correction in the F and A platforms..... (thanks to our Squirrely counterpart, Shane.)