Tremec TKO, Shifting problems

[KeislerGene]

I used a old lakewood and dialed in pretty good with just filing the paint out the holes. I think I read somewhere that the older lakewoods were better than the newer ones...
Keith

This is true the hydro forms are miss shapen from many years of production. I heard it's the same thing with McLeod.




The 3rd gear shifting under load or higher Rpm can sometimes be related to the person shifting the trans. Sometimes you are over shifting the handle. If you take notice the Tremec shifter, ours and others have spring tension so when the handle comes out of 2nd it automatically centers for 3rd. If you are having an issue with it blocking that typically could be the issue. If it is grinding that means the snycros havent matched up typically at rpm above 6-6200.



When shifting try using just the palm of your hand when going from 2nd to 3rd. Let the shifter do the work.

Gene