Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States

      Painting over chrome?

      Is there any tips/tricks for painting over chrome? I have tried to paint over some chrome trim pieces and the paint wrinkles. I have tried priming, sanding, get the same effect no matter what. I have cleaned the pieces well before painting, I dont know what the hell is going on.

      Matt


    2. #2
      Join Date
      Jul 2005
      Location
      Marshall , MO
      Posts
      699
      I used 120 grit to sand mine down, the sealed primed and painted.
      Brad Shepard
      69 Malibu
      Marshall, MO

    3. #3
      Join Date
      Jan 2009
      Location
      Jacksonville Florida
      Posts
      667
      what kind of paint and primer are you using?
      Do what's right,not what's easy
      69 Firebird
      71 Cuda
      98 Supra 6speed white APU
      98 Lexus GS400tt widebody

      Elite Custom Body
      Stefan B.

    4. #4
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      Just some Rustoleum oil based gloss black..
      Matt

    5. #5
      Join Date
      Jan 2009
      Location
      Jacksonville Florida
      Posts
      667
      Well there is your problem. Seriously, if you're trying to use rattle can stuff, make sure that primer and paint are compatible before spraying your trim. I have found that Sherwin Williams GBP 988 etching primer in aerosol can works great with Krylon Fusion paint on small trim stuff.
      Do what's right,not what's easy
      69 Firebird
      71 Cuda
      98 Supra 6speed white APU
      98 Lexus GS400tt widebody

      Elite Custom Body
      Stefan B.

    6. #6
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      Cool Thanks, Ill check it out.
      Matt

    7. #7
      Join Date
      Mar 2008
      Location
      Ramona, Ca. San Diego area
      Posts
      1,307
      Country Flag: United States
      I do a light sand blast to take the sparkle of the chrome and then prime, sand, and paint.
      67 Camaro convertible (Jinx)

    8. #8
      Join Date
      Jan 2009
      Location
      Jacksonville Florida
      Posts
      667
      I'd do heavy sandblasting,epoxy prime and then paint.
      Do what's right,not what's easy
      69 Firebird
      71 Cuda
      98 Supra 6speed white APU
      98 Lexus GS400tt widebody

      Elite Custom Body
      Stefan B.

    9. #9
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      Id go that far, but this is a budget build. With about 90% of the money going towards suspension/brakes/wheels. Soo all of my paint work will be with Rustoleum or now sherwin and krylon!
      Matt

    10. #10
      Join Date
      Oct 2005
      Location
      New Washington, IN
      Posts
      1,509
      I did this on a lot of engine parts on AIr Force 69. T hermostat housing, alt brackets ,etc..

      I sprayed a very light dust coat or paint ,let it get tacky, then go back over with several light coats. Used low gloss rattle can paint. Turned out pretty good, for a budget build like yours.
      1971 Camaro 427 in waiting
      1988 C1500 Daily Driver
      1955 Bel Air, blown BBC street car




    Advertise on Pro-Touring.com