Results 1 to 8 of 8
-
09-21-2011 #1
Registered User
- Join Date
- Dec 2004
- Location
- California
- Posts
- 794
Anyone here using/have AutoCAD they will seperate with?
Im not sure where this goes, but I really want AutoCAD on this new computer. Do any of you have it, the last version I used was the 03 version. I have lots of parts I need to draw.
-
09-21-2011 #2
Registered User
- Join Date
- Sep 2011
- Location
- Hardyston,NJ
- Posts
- 79
I have it on my work computer and my home computer. I have a cracked version 0f 2007 on my home computer, have you tried a website where you can get the program from? otherwise it might cost a couple grand for a newer version of AutoCad. They have an Autocad app for Droid phones also, but thats not very easy to draw with.
09-21-2011 #3
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I use an 2008 multiple user licensed edition here at work.....this stuff is expensive for a legal licensed copy from Autodesk.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
09-21-2011 #4
Registered User
- Join Date
- Jun 2011
- Posts
- 41
I have autocad 2000, but lost the pass code. Anyone know how to get it?
09-21-2011 #5
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
You have to call Autodesk and they can reset your passcode....I have had to do that with a couple of copies that were on computers that crashed.
Originally Posted by Dave Maxwell
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
09-21-2011 #6
Registered User
- Join Date
- Jun 2011
- Posts
- 41
I got it second hand and it was never registered to me
09-23-2011 #7
Registered User
- Join Date
- Apr 2005
- Location
- MA
- Posts
- 39
You can get a free .dwg editor at: www.draftsight.com. I have not tried this one yet, still using DWG Editor which was the previous one provided free by Solidworks, but was discontinued due to a lawsuit from Autodesk. If you can find DWG Editor it works just about exactly like Autocad, even runs my macros and LISP routines I wrote when still using Autocad.
Steve
1968 Camaro
09-26-2011 #8
New to Pro-Touring
- Join Date
- Jan 2010
- Posts
- 2
i have a copy of autocad 14 if that will help
Reply With Quote
