Results 1 to 1 of 1
Thread: Front spring advice for BBC
-
09-20-2011 #1
Registered User
- Join Date
- Sep 2007
- Location
- Denver
- Posts
- 325
Front spring advice for BBC
I have 675lb coil over springs on Varishocks on a 68 Camaro with DSE sub conversion setup. This was suggested to me and I thought maybe too much...not. With the collar adjusted about >1.5-2 inches...about to the end of the threads.....it still sets a little low. Most of the engine bay items are installed but this is with no driver and no interior yet..and no fuids besided engine oil. I've seen that I can go up to 700 or 725lbs. Any other suggestions?
PS spring pics show about 1/2 inch or less between coils. When mounted length of spring seemed correct at 10 "
David Beckstrom DVM
-
Reply With Quote
