Glazing putty question/recommendations

[dipren443]

Looking for some recommendations for some glazing putty.

I have been looking at the Evercoat product line and there are far too many choices (Metal Glaze, Euro-soft, just plain Polyester glazing putty, etc.)

I am just trying to clean up the passenger side of my firewall a bit. It was welded up for a semi flush finish and there are some small imperfections I would like to remedy. See pic below. Firewall is currently in 2K epoxy primer. I am not set on the Evercoat range, if anyone has another recommendation, feel free to send it my way. Thanks in advance.

Attachment 49223

[Rick D]

Evercoat 416 Metal glaze, works real nice goes on smooth and sands easy. They have it in a new package I think it's 412 but it's a soft package so you can get most of it out of the container.

[68Resto-mod]

I've been using U-Pol Dolphin Glaze Finishing putty. A 440 ml bag is about $15.

[dipren443]

Evercoat 416 Metal glaze, works real nice goes on smooth and sands easy. They have it in a new package I think it's 412 but it's a soft package so you can get most of it out of the container.

Thanks for both recommendations fellas. Going to try the Evercoat (only 'cause I already ordered it before I saw the second response!).

[elitecustombody]

Any Evercoat polyester glazing putty will work just fine