Results 1 to 2 of 2
Thread: Wheel stud question...
-
08-05-2011 #1
Pro-Touring Veteran
- Join Date
- Nov 2006
- Location
- Washington, MO
- Posts
- 2,363
Wheel stud question...
My factory stud has a knurl diameter of .472
Would a stud with a .487 knurl diameter work?
-
08-05-2011 #2
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
It should, generally a .010" To .015" interference fit seems to be common. As long as the un-knurled part of the stud will clear the hole. At the worst, you may have to ream the holes a little.
Last edited by David Pozzi; 08-05-2011 at 08:04 PM.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
-
Reply With Quote
