Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 15 of 15

    Thread: NEW 69 Camaro.

    1. #1
      Join Date
      May 2010
      Posts
      128

      NEW 69 Camaro.

      This is a car I picked up with the full intention of building for myself as a track/driver. I have just come across a car I can't pass up and I'm letting this one and my 65 SS Chevelle project go.

      So here is the run down on the car. 99% NEW. It will have a Clean California title for it and It will be registerd as a 1969 Camaro 8cyl car. Yes its legitimate.

      Its a New Dynacorn body so there is absolutly no rust. The front clip is new also with a GM steel cowl hood. It has a Currie 9 inch rear with a 350 Tru-Track Posi and Willwood 4 piston disk brakes and Fat Man Fab coil overs in the rear.

      The front has a stock subframe with a new power steering box, new steering linkage, Hotchkis springs for a small block and stock control arms. I did put Global West Bushings in the lower but not the upper. I was intending on painting the A-Arms after the body work was done. I have the upper bushings just not installed. New spindels with Willwood 4 piston disk. DSE body mounts.

      I have almost a full interior. Its all black and mostly new. Front seats, (No rear seat), Carpet, dash pad, front and rear door panels, carpet, headliner, arm rest. I have a new Autowire harness for the car. Completly rebuilt tilt steering column. Boss 338 wheels

      There is no glass or regulators, latches. The body will need to be alligned. I have some other little things floating around that will go with the car.


      I have just around $21,700 in the car as it sits with all of the parts listed, I would like to get close to that if possible. Shipping can be arranged in the US for about $600 to $1,200 depending on where you are.

      Feel free to call me and I will answer any questions. Thanks, John 510-867-1797

      I just tried to upload pics and my pics are to big so I will take new ones this afternoon



    2. #2
      Join Date
      Feb 2009
      Posts
      85
      can you please post pics?
      FadedSS

    3. #3
      Join Date
      Feb 2003
      Location
      Houston, TX
      Posts
      3,446
      Country Flag: United States
      Was the Dynacorn body built with the mini-tubs included, or stock rear tubs? Pics to ynot_dv8(at)hotmail.com please.

      Tony
      Co-Founder, LS1TECH.com


      Forged Wheel Dealer, Contact me for a quote!
      www.DV8Motoring.com

    4. #4
      Join Date
      May 2010
      Posts
      128
      Not mini tubbed. I just got home and going to take a few new pics. All of the interior parts are in storage so I'm sorry I can't take any pics of that stuff just yet. Sending out emails as I post this.

      Thanks

    5. #5
      Join Date
      May 2010
      Posts
      128
      Here are a few pics. The car is in my driveway at the moment covered and is going over to my shop this weekend.

    6. #6
      Join Date
      Feb 2011
      Location
      Kalamazoo, MI
      Posts
      144
      Nice, I love this! GLWS
      1969 Pontiac GTO
      -The Nameless project.

      0331, USMC, Semper Fi.

    7. #7
      Join Date
      May 2010
      Posts
      128
      So I have had a few people ask if its Mini Tubbed, well, no, but it can be. I will be happy to Mini Tub it for the asking price. I have a DSE Tub kit just sitting in my storage. The only reason I'm letting this go is to pick up a Bad A$$ twin turbo GTM form a friend.

    8. #8
      Join Date
      Jul 2011
      Posts
      5
      pics?

    9. #9
      Join Date
      May 2010
      Posts
      128
      What happened to my pics????? Lets try this again.
      Attached Images Attached Images              

    10. #10
      Join Date
      Jan 2005
      Location
      CT
      Posts
      232
      Best of luck.

      How do register these Dynacorn cars?

    11. #11
      Join Date
      May 2010
      Posts
      128
      Well I bought another Camaro that was a total rust bucket and Legally switched the vin and cowl with CHP and DMV. It just cost me about $2,000 to do that, now I'm thinking I will build the car and keep it. I have a couple of LS1's and may get my hands on a LSX engine I just heard about this morning.

    12. #12
      Join Date
      Apr 2009
      Location
      Fort Worth, Texas
      Posts
      158
      Country Flag: United States
      looks great. good luck with sale. Might hit you up in a few weeks.

    13. #13
      Join Date
      Oct 2004
      Location
      St.Anne Il
      Posts
      3,924
      Country Flag: United States
      Wow thats cool wish i could do that with my Dynacorn but i have to build the whole thing then have it inspected to get a title in my State..good luck with car..
      Darrin Stalnecker
      1969 Camaro Convert full pt pr
      2007 Corvette Supercharged
      1968 Camaro LS1 T56
      http://www.fquick.com/dropit69

    14. #14
      Join Date
      May 2010
      Posts
      128
      Thanks for the replies guys.

      This has been an 8 week process but all is good now, expensive but good. See if DMV will let you rebody The Dynacorn body with another cars vin. Just show a recycle receipt for the doner car.

      It may have a 2003 Vette LS1(with all the goodies) and a 6-Speed in a few weeks.

    15. #15
      Join Date
      Aug 2011
      Location
      Campbell, CA
      Posts
      15
      Country Flag: United States
      is the car still available? call me 480-688-7669 Jim




    Advertise on Pro-Touring.com