Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6

    Hybrid View

    1. #1
      Join Date
      Oct 2006
      Location
      McKinney, TX
      Posts
      899
      Country Flag: United States

      fabbing a trans mount

      Is it a bad idea to bolt the trans directly to a fabbed mount point?

      I have a poly mount, but damn that thing is thick. I was thinking of just mounting it direct to the fabbed mount--metal to metal.

      1. is this a bad idea?

      2. Will the torque wear the welds on the mount?

      Confucius says, "Choose a job you love, and you will never have to work a day in your life"

      My build Beast


    2. #2
      Join Date
      Feb 2010
      Location
      Corvallis Montana
      Posts
      597
      Country Flag: United States
      not a good idea your trans is prob aluminum? if it is I think you will rip out you threads or crack your trans.

    3. #3
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      You'll crack the trans unless your frame is REALLY rigid. I made a lower profile rubber mount for about $10. I used a rubber coil spring spacer from Autozone and some spare steel.


    4. #4
      Join Date
      Oct 2006
      Location
      McKinney, TX
      Posts
      899
      Country Flag: United States
      Gary, that is an awesome idea! Just to make sure I've got this right, because I may just copy you! I've got a copy of your pic below with some material questions. Have I labeled them correctly?

      And do you remember the starting part? I've been searching, but all of the coil spring insulators are round and open. Could it have come from a leaf spring?
      Confucius says, "Choose a job you love, and you will never have to work a day in your life"

      My build Beast

    5. #5
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      You got it. The aluminum part is only there as a spacer for the bolt head and to prevent it from turning. You could weld the bolt to the steel U channel and skip the aluminum.
      Aotozone has the rubber spring spacer blocks, pack of 4 for $10. I've bought them before for other projects. If you have a wood bandsaw, it works great for cutting them.
      The steel triangular piece is part of the old mount cut shorter. I went from a Muncie to a Richmond 6 speed on a 68 vette, mount needed to be moved back, and about 1/2" lower. After looking at it, it seemed flimsy. So I made a copy out of thicker metal with a bent down front edge.

    6. #6
      Join Date
      Dec 2007
      Location
      Carlsbad, Ca
      Posts
      1,213
      Country Flag: United States
      how does the crossmember mount to the frame? you can also put the isolator at this spot and mount solid to your trans.
      Tim

      The WidowMaker: Garage Built 70 Chevelle

      Special Thanks To: Rushforth Wheels, MuscleRodz, Kore3 & SC&C

      Build Thread Link




    Advertise on Pro-Touring.com