sand paper ?

[brans72]

ok guy's no bashing on me please! I have the panels off a 67 short bed c10 and they need to be clean up from previous unfinished body work where all molding where shaved and you can see where filler was applied but not sanded down correctly and looks crappy. I was wondering since on a budget and I will be using a decent electric sander what paper you recomm to use. This is a orbitale sander and I know I will need more then one type paper. This will be a learning process for me but if I can get some help would be great and one more step closer getting back to my personal car and finished with wifes truck for the monment. Thanks for any advice

Yes I have a compressor if anyone wants to recomm a air DA to look into getting also here are the specs I/R SS5L5 CFM at 90 PSI
18.1Max. PSI
135Volts
230Amps
22.5HP
5Air Tank Size (gal.)
60Tank Description
Vertical
That is all budget could afford at the time. So hopefully someone will be able to give me some info and tips on a D/A and setting it up right as in regulating part correctly for when time comes. Thanks guys Brandon