Results 1 to 8 of 8
Thread: Brake lines
-
06-28-2011 #1
Starting The Transformation
- Join Date
- Nov 2010
- Posts
- 181
Brake lines
Im getting ready to start runnin my brake lines and just curious what you guys are going with? Are you buying the pre-bent kits or making your own. Is it worth spending the money and going with stainless? Thanks
-
06-28-2011 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I made my own, but used regular steel lines.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
06-28-2011 #3
Registered User
- Join Date
- Aug 2008
- Location
- Pgh, PA
- Posts
- 2,177
I made my own stainless, but probably would not do it again.
'66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...
-
06-28-2011 #4
Registered User
- Join Date
- Dec 2009
- Posts
- 1,607
^ Why not WM?
Ron in SoCal
69 Camaro in progress
http://www.lateral-g.net/forums/showthread.php4?t=31246
Used to be known as flash911
06-28-2011 #5
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
We have a non corrosive easy bend material that flares easy (MUCH easier then stainless). Makes tight bends with bending pliers we provide and is bendable with your thumbs without kinking for most bends.
Enough line to do the emtire car, tube nuts and bending pliers is only $175 for the entire kit
06-28-2011 #6
Registered User
- Join Date
- Aug 2008
- Location
- Pgh, PA
- Posts
- 2,177
For some of the reasons Frank mentioned. Stainless is hard to bend well, hard to flare well, requires extra attention in making sure things don't leak, work hardens, is expensive - and happens to look real nice. I have all the right tools - except skill and patience. It's just a PITA. I'm glad mine is done but honestly there are a couple things I'd like to do but since it would mean touching my brake lines I'm staying away.
Originally Posted by Ron.in.SoCal
'66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...
06-28-2011 #7
Registered User
- Join Date
- Mar 2007
- Location
- Florida
- Posts
- 2,391
I make my own. I use regular steel that comes coiled for most of the vehicles I work on, and the stainless on show cars. Recently got a new Eastwood flaring tool thats awesome if you do a lot of tubing work in various sizes. It's much quicker than a standard double flairing tool and doesn't make a clamp mark on the tubing like the basic tools do. New tool is in the vice and the standard tool in the red box in the background in the pic below. A tubing cutter and deburring tool will also speed up the operations but you can do the work with hacksaw and files. Brake lines are very easy to form by hand. There are tools to help curve the tubing but you don't really need one for brake lines.
06-28-2011 #8
Registered User
- Join Date
- Oct 2008
- Location
- Durham,NC
- Posts
- 664
No picture to share with us on the kit Frank? Brandon
Reply With Quote
