Results 1 to 3 of 3
-
06-15-2011 #1
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
LS3 pistons, flat, dished, valve reliefs?
Can someone confirm the style of pistons in an LS3, are the flat, dished, flat with valve reliefs?
Thanks
Scot
86 Monte SS
-
06-15-2011 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I thing you will find your answer about half way down This Page
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
06-15-2011 #3
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
That's the info I was looking for. Thanks
Scot
86 Monte SS
Reply With Quote
