Power steering help needed

[ertoys]

I have a 67 camaro that I am installing power steering on.

I have installed a quick ratio box and I have a reman. pump for a 67 camaro with p.s. and short water pump.

The pump mounts on the drivers side of the block down low by the motor mount.

I also have a three groove crank pulley (summit) for a smallblock chevy with p.s. and a short water pump.

Now for the problem; the p.s. pump pulley sticks out about 1/4"-1/2" further than the last groove on the crank pulley.

Also my p.s. pump has a female pressure fitting and so does the hose, what to do ?

Please help
Ed