Dan, I have been bench-building my next engine. What I have so far is an LS1/6 engine, with a 4.8 crank, carb'd Victor Jr intake, ls7 lifters, comp pushrods, beehive springs, and ls7 rockers. Comp makes a cam that should make peak power at 7500 with this combo; I plan to shift at 8000. With the short stroke of the 4.8L crank (3.25"), even at 8000rpm the mean piston speeds won't be
that high.
Using Comps engine program this engine should make ~540hp with stock head flow numbers. Granted, this is simulated, but I have found this program's number to be close to real; if anything a good idea to go off of.
edit: I'm still toying with the idea of piston oilers. Some cheap insurance...