69 Camaro Engine Question

[63SW]

If its an X-11 car , it will be a SB car .
X-11 can be one of 2 models .
1) a BASE MODEL CAR WITH the Z-21 STYLE TRIM PACKAGE ( meaning - Chrome side louvers , rocker moldings , drip rail moldings , the headlight bezels will have the chrome ring around the outside edge , and the tail lights will have the chrome trim going up n down in the lens area )
Could be a 307 , 327 or a 350 car ... if a 350 car and was a factory 4 brl carb - Possibly a LM-1 CAR.
2) a SS-350 Model and can be an AUTOMATIC or a 4Speed Car.. 10 bolt is also a possibility. but i think should me a multi leaf car ..( not 100 % sure on the leaf spring fact tho )

Hope that helps.

PS , IF it had a original BB in it , it should have a plate welded to the side of the rear frame rail on the DR side just behind the rear center of the tire . THIS CAN ALSO BE ADDED and ONLY a $5 part but was for the dual exhaust hanger . .



if factory paint , possibly look for the rear tail panel to be SEMI FLAT BLACK .

Look at pics on CAMARO.ORG - might help.
copo's and ZL1s werent blacked out to my knowledge tho.