Results 1 to 5 of 5
Thread: Help me find fuel lines
-
05-08-2011 #1
Registered User
- Join Date
- Apr 2005
- Location
- IN/MI border
- Posts
- 1,919
Help me find fuel lines
Looking to get my fuel lines squared away. I don't have a tank yet but am running a LS motor. Ran across these below on ebay. I assume I need a return line with using FI. Would 2 of these work? What other options do I have? Would prefer to find a pre-bent line.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
-
05-09-2011 #2
Registered User
- Join Date
- Jun 2005
- Location
- Lynnwood Wa.
- Posts
- 248
Inline tube can supply pre-bent fuel lines. I am sure there are other vendors as well. Yes, you will need to have a return line.
Oliver Shultz
It's OK to giggle and snicker. don't laugh and point
05-09-2011 #3
Registered User
- Join Date
- Apr 2005
- Posts
- 413
Most everyone that is running near stock HP (<500HP) LSX uses a C5 corvette fuel fillter / regulator that mounts near the tank. This results in a single line to the front and a short return line. They can be bought at rockauto.com for cheap. There are some LS1's that use a double line to the front but most do not. Do some searches in the LSX forum for more info.
05-09-2011 #4
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
Or there's another option.
https://www.pro-touring.com/showthre...-and-Vaporworx.
https://www.pro-touring.com/showthre...rWorx-products.
EFI is a different monster than carburetted applications. 3/8" lines will support the needs of 99% of the EFI swap applications.VaporWorx. We Give You Gas http://www.vaporworx.com
05-09-2011 #5
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,264
This is what I used. About $500. Simple install, stainless, & comes with everything you need. Once you piece everything together you end up spending nearly the same as buying this kit. The guy was very helpful and is almost always available.
http://tubetechweb.com/
Reply With Quote
