Results 1 to 4 of 4
-
04-26-2011 #1
Registered User
- Join Date
- Jul 2010
- Location
- Mooresville,NC
- Posts
- 761
2nd gen Rear swaybar upper bracket bolt size?
Hey guys....i'm about to install my adjustable rear bar from dave at PTFB and need 2 bolts for the upper brackets that are on the frame since my car didnt come with factory rear bar...what size was the factory bolts for 71?
Thanks,
Matt
1971 Chevrolet Camaro RS-Detroit Speed Equipped
1966 Chevrolet C-10-Driver/Project truck
-
04-26-2011 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
Matt are you thinking about the mounting bracket that bolts to the frame or the rod end through the frame bracket?
The factory bolts on my black car was 3/8" 16p x 1" into thread inserts in the frame. My blue car the bracket was welded to the frame. Told it might have been a dealer installed sway bar.MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
04-26-2011 #3
Registered User
- Join Date
- Jul 2010
- Location
- Mooresville,NC
- Posts
- 761
talking about the bolts for the mounting bracket to the frame....mine are the welded ones....early second gen...
1971 Chevrolet Camaro RS-Detroit Speed Equipped
1966 Chevrolet C-10-Driver/Project truck
04-27-2011 #4
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
oh, ok so your like this Matt?
the trough bolts are also 3/8". Just go 1/2" longer than the bracket it self. Is that what you needed?MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
Reply With Quote
